POROLAY GEL-LAY by Kai Parthy / Lay-Filaments
5 & 10 Metre samples of POROLAY GEL-LAY by Kai Parthy / Lay-Filaments POROLAY GEL-LAY is a new filament which has a jelly-like feature. This material is made from a rubber-elastomeric polymer and a PVA-component. That means that part of this filament is water soluble. Once you rinse this material in water, the PVA component dissolves and the rubber polymer remains as your micro-porous object. The jelly feature of this material makes it ideal for printing artificial limbs or body parts for e.g. robotics, marine animals, floatables and all other squishy objects. GEL-LAY is also very suitable for use in bio-mechanics and objects in water.
For detailed information on this material go to 3ders
You can purchase whole spools/reels/coils from these suppliers.
Europe - FormFutura
Middle East -
United Kingdom - 3DFilaPrint
Note: All filament weights include packaging. Average weight for 5 metres of 1.75mm filament (without packaging) is 15 gms and 5 metres of 2.85mm filament is 35 gms.
Samples are shipped in a clear resealable bag, with a small sachet of silica gel.
Manufacturer recommended printer temperatures.
Extrusion Temp: Approx 210ºC
Platform Temp: Heated bed not required - However can print on a bed of 40ºC - 50ºC
Platform Materials: Recommended Blue Masking Tape
Please note, the above temperatures are only a guide.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours email@example.com
Are you a filament Reseller? You can be one of just five Resellers from each region or country, displayed on this product listing. Contact firstname.lastname@example.org for more information.
|Brand||Kai Parthy / Lay-Filaments|
Write an online review and share your thoughts with other shoppers!
5 & 10 Metre samples of ABS Thermochanging Filament. At a low temperature the filament is one colour and as the temperature increases the filament turns a different colour. When the filament temperature cools it goes back to its original tone. However, just holding it in your warm hand can change the colour again. Here we have; Blue Green to Yellow Green - Grey to White - Purple to Pink available in 1.75mm & 3mm.£1.45View Item
A 5 Metre sample of HIPS filament by Reprapper Tech Ltd. HIPS = High Impact Polystyrene, support filament. Let your design imagination go wild, for now you can create elaborate prints with this amazing product. Using a dual extruder you can print alongside ABS and place the whole printed item into Limonene and watch it dissolve, leaving your ABS print unchanged (apart from smelling of citrus fruit for days to come)!£1.45View Item
5 & 10 Metre samples of ABS Ultra Violet Reactive Filament. This filament changes colour almost instantly when exposed to UV light, especially when in direct sunlight. The colour changes back to white within just a few seconds.£2.95View Item