PolySupport™ by Polymaker
A 10 Metre sample of PolySupport™ filament by Polymaker. An easy to remove support filament, that needs no water or limonene to dissolve, now how simple is that. Just print and remove. Not suitable with ABS.
For detailed information on this material go to Polymaker.
SUPPORTING YOUR IMAGINATION
How many times have you printed a part only to find out that either the print failed due to the lack of support, or how difficult it can be to remove the support without causing some damage to the part? We are glad to provide you with a new solution. PolySupport™ is a material designed specifically to generate support structures that are adequate to support the part being built, and yet extremely easy to remove afterwards.
SINGLE AND DUAL
PolySupport™ can be used on both dual and single-extrusion printers. It can be used either as a dedicated support material (dual-extrusion), or as both the modelling and support material (single-extrusion). In both cases the support structure can be easily removed. So no matter what printer you may have you can rely on PolySupport™ to support your creations.
NO MORE HASSLE
PolySupport™ works just like your regular 3D printing filaments. Easy to print and store. No sensitivity to normal moisture or heat. No need to work with dangerous organic solvents.
You can purchase whole spools/reels/coils from these suppliers.
Asia - Polymaker
Europe - Polymaker
Middle East -
United Kingdom -
USA - Polymaker
Note: All filament weights include packaging. Average weight for 5 metres of 1.75mm filament (without packaging) is 15 gms and 5 metres of 3mm filament is 35 gms.
Samples are shipped in a clear resealable bag, with a small sachet of silica gel.
Manufacturer recommended printer temperatures.
Extrusion Temp: 225-235ºC
Platform Temp: Tested at 50ºC
Please note, the above temperatures are only a guide.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours email@example.com
Are you a filament reseller? You can be one of just five Resellers from each region or country, displayed on this product listing. Contact firstname.lastname@example.org for more information.
Write an online review and share your thoughts with other shoppers!
5 & 10 Metre samples of Cool Grey HIPS by Fila-Cycle. 3D printing filament material FCHIP-100 made from 100% recycled HIPS plastic material. An environmentally sustainable alternative to virgin plastic polymer filaments, helping to keep you earth friendly.£1.95View Item
3D printing PELLET material FCHIPS-010 made from 100% recycled HIPS or ABS plastic material. An environmentally sustainable alternative to virgin plastic polymer PELLETS.£1.95View Item
5 Metre samples of EasyFil™ HIPS by FormFutura Formfutura EasyFil™ HIPS Red is a beautiful deep traffic red coloured and 100% opaque filament. 3D printed objects in EasyFil™ HIPS Red will have a classy matt red finish. You will now be able to print PolyStyrene objects just as easy as PLA, or ABS objects!£1.95View Item
A 5 Metre sample of HIPS filament by Reprapper Tech Ltd. HIPS = High Impact Polystyrene, support filament. Let your design imagination go wild, for now you can create elaborate prints with this amazing product. Using a dual extruder you can print alongside ABS and place the whole printed item into Limonene and watch it dissolve, leaving your ABS print unchanged (apart from smelling of citrus fruit for days to come)!£1.45View Item
5, 10 or 20 Metre samples of MOLDLAY by Kai Parthy CC Products. Wax like filament for investment casting or permanent mold casting!£4.95View Item