Polymax PETG Samples

PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.

PolyMax™ PETG offers better mechanical properties than any other regular PETG making it a good candidate for a wide range of applications.

PolyMax™ PETG features Polymaker's Nano-reinforcement technology:

Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance.

PRINT SETTINGS

Nozzle Temperature:
230˚C – 240˚C

Printing Speed:
30mm/s – 50mm/s

Bed Temperature:
70˚C – 80˚C

Bed Surface:
BuildTak®, PEI sheet

Cooling Fan:
LOW for better surface quality
OFF for better strength

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters

MECHANICAL PROPERTIES

Young’s Modulus:
1523 ± 50 (MPa)

Tensile Strength:
31.7 ± 0.1 (MPa)

Bending Strength:
58.3 ± 4 (MPa)

Charpy Impact Strength:
9.7 ± 2.6 (kJ/m2)

THERMAL PROPERTIES

Glass Transition Temperature:
79 (°C)

Vicat Softening Temperature:
82 (˚C)

Drying Settings:
70˚C for 8h

Recommended Support Materials:
N/A

Other:
It is highly recommended to use the PolyBox™ when printing with PolyMax™ PETG and to store it in the resealable bag.
Download application note

TDS:
DOWNLOAD

SDS:
DOWNLOAD

PIS:
DOWNLOAD