PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.
PolyMax™ PLA is an incredibly easy-to-print filament with improved mechanical properties, making it an excellent alternative to ABS.
PolyMax™ PLA features Polymaker's Jam-Free™ technology and Polymaker's Nano-reinforcement technology:
Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.
Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance
190˚C – 230˚C
40mm/s – 60mm/s
25˚C – 60˚C
Glass with glue, Blue Tape, BuilTak®
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
1879 ± 109 Mpa
28.1 ± 1.3 Mpa
48.0 ± 1.9 Mpa
Charpy Impact Strength:
12.2 ± 1.03 kJ/m2
Glass Transition Temperature:
Vicat Softening Temperature:
80˚C for 8h
Recommended Support Materials:
PolySupport™, PolyDissolve™ S1