DescriptionVarious sample lengths of the popular support material Polydissolve by Polymaker™
PolyDissolve™ S1 is a Poly (vinyl alcohol) based filament. PVA has excellent solubility in water, making PolyDissolve™ S1 a very good dissolvable support material for FFF 3d printing.
PolyDissolve™ S1 can be used as full support material or only as the interface between the support structure and the model, this later can allow the support to be easily removable by hand but will also speed up the dissolving process.
PolyDissolve™ S1 is suitable to use with materials such as PLA - TPU - PVB - PA (Nylon).
Removing the support
a) PolyDissolve™ S1 is designed to be partially removable by hand so we recommend to remove the support that can be easily pealed off before submerging the model into water.
b) After partially removing the support the model can be submerged in water to dissolve away the rest of the support. This process can be speed up by agitating the water, using warm water (>50˚C) or regularly changing the water.
General Printing Settings
Recommended 3D printing temperature:
215 – 225 °C - Print Temp
25 – 60 °C - Bed temp
Recommended 3D print speed:
30 – 40 mm/s
The PolyDissolve™ 3D printing filament works well with the majority of 3D printer surfaces. Though if you require additional adhesion, check out the links below.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours email@example.com
Are you a filament reseller? You can be one of five Resellers from each region or country, displayed on this product listing. Contact firstname.lastname@example.org for more information.