PLA Composite Carbon Fiber by Protopasta

Proto-pasta Carbon Fiber Composite HTPLA is a combination of milled carbon fibers and high-performance PLA
£3.50

Product information

The original is still the best! World's First Carbon Fiber PLA was kickstarted by ProtoPlant nearly 5 years ago. Others try, but can't match the quality and ease of printing experience afforded by this product. Available at a cost low enough for everyday printing, try a mammoth 3kg spool for large format printing! 1.75mm diameter 3kg spools contain more than 1 km of filament!

Proto-pasta Carbon Fiber PLA is based on our easy printing, high quality PLA. Made from the highest quality, dry ingredients and extruded with care in our Washington facility on our own purpose-built extrusion systems. CFPLA prints are demonstrably more rigid with easy processing (often using standard PLA settings) and support removal.  Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts. Layer lines disappear with the beautiful matte black finish.  Also has a slight sheen due to the embedded carbon making it very photogenic!

In filament form, CFPLA is slightly more brittle than standard PLA, and requires extra care when handling. 

Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles and/or bowden type machines, 

We frequently print using direct-drive systems with 0.4mm nozzles and print as high as 240C, though suggest 0.6mm and 210-230C for the best experience.

  • Available in 1.75 & 2.85 (3) mm diameters.
  • 500g is on a 8" diameter spool & 3kg is on a 12" diameter spool.
  • Usable on most PLA-compatible printers, such as Lulzbot,

Technical Specifications

Brand Proto-pasta
Weight 0.037kg

Reviews

Write a review and share your thoughts with other shoppers!
No reviews yet, be the first.