55 Products

Other Speciality Filaments

A section that will make you wish you had more time than you have, just so that you can 3D print until your hearts content.  With such a wide selection of the most exciting 3D printing filaments on the market today, this is where your eyes are most probably bigger than your wallet (not an issue here when the samples are so cheap). So go on click away and add a few to your basket - because your worth it!
Sort
Showing products 1 to 55 of 55
bronzeFill 2.85mm by ColorFabb

A sample of bronzeFill by ColorFabb An exciting product for the 3D desktop filament market is an understatement! This is an amazing filament, that prints like plastic, but polishes, weighs and feels like bronze.

£5.65
PCTPE by taulman 3D

A 5 or 10 Metre sample of PCTPE by taulman 3D. Plasticized Copolyamide ThermoPlastic Elastomer. An extremely flexible yet durable and strong TPE and nylon based material. Highly flexible material, yet as strong as nylon.

£2.95
Nylon 680 by taulman 3D

5 & 10 Metre samples of Nylon 680 by taulman 3D. An FDA Nylon Resin Co-Polymer, Ethylene Oxide and Flash Steam compatible. It is a pure polymer that is FDA approved (USA). Now in its testing phase of development. Slightly stiffer and clearer in colour than Nylon 645. More information to follow.

£4.35
1.75mm 100% Recycled HIPS by Fila-Cycle

5 & 10 Metre samples of Cool Grey HIPS by Fila-Cycle. 3D printing filament material FCHIP-100 made from 100% recycled HIPS plastic material. An environmentally sustainable alternative to virgin plastic polymer filaments, helping to keep you earth friendly.

£1.95
100% Recycled pellets 3.5OZ PKT

3D printing PELLET material FCHIPS-010 made from 100% recycled HIPS or ABS plastic material. An environmentally sustainable alternative to virgin plastic polymer PELLETS.

£1.95
3DXSTAT™ ESD ABS by 3DXTech

A 5 or 10 Metre sample of 3DXSTAT™ ESD ABS by 3DXTech. Carbon Nanotube (CNT) enhanced compounds are used in critical applications that require electrostatic discharge (ESD) protection and a high level of cleanliness. A superior conductive filament that raises the 3D Filament bar to yet another level.

£3.60
3DXSTAT™ ESD PETG by 3DXTech

A 5 Metre sample of 3DXNano™ ESD PETG by 3DXTech. Carbon Nanotube (CNT) enhanced compounds are used in critical applications that require electrostatic discharge (ESD) protection and a high level of cleanliness. A superior conductive filament that raises the 3D Filament bar to yet another level.

£3.60
Alloy 910 by taulman 3D

A 5 or 10 Metre sample of Alloy 910 by taulman 3D. With a tensile strength @ 8,100 PSI this is the Schwarzenegger of the filament world! Alloy 910, the advanced New Material release from taulman 3D

£3.25
Anti Microbial filament by Purement

PUREMENT is the world’s first antibacterial 3D printing filament and is safe enough for home use! 5 and 10 Meter samples available.

£3.25
Aromatic Coffee PLA V 2.0 by Proto Pasta

5 or 10 Metres of Proto-pasta's High Performance PLA with the Aroma of Coffee!

£4.25
Biofila Linen by twoBears

A 5 or 10 Metre sample of Biofila Linen by twoBears. Available in both Linen and Silk form. BioFila A Biopolymer known as Lignin or lignen which is a complex polymer of aromatic alcohols known as monolignols.

£3.10
Biopolymer Filament 3mm Sky Blue samples by 3Dom Filaments Ltd

Samples of Ingeo™ biopolymer, manufactured by 3Dom Filaments Ltd. 3Dom filament is made from Ingeo™ biopolymer, the market-leading material among a new generation of performance plastics and fibers made from plants, not oil and from renewable resources. Manufacturing Ingeo biopolymer produces less greenhouse gasses and uses less non-renewable energy than traditional fossil-based plastics, such as PVC, Polypropylene, PET or Polystyrene.

£2.45
Biopolymer Filament 3mm yellow samples by 3Dom Filaments Ltd

Samples of Ingeo™ biopolymer, manufactured by 3Dom Filaments Ltd. 3Dom filament is made from Ingeo™ biopolymer, the market-leading material among a new generation of performance plastics and fibers made from plants, not oil and from renewable resources. Manufacturing Ingeo biopolymer produces less greenhouse gasses and uses less non-renewable energy than traditional fossil-based plastics, such as PVC, Polypropylene, PET or Polystyrene.

£2.45
BluPrint by taulman 3D

5 & 10 Metre samples of BluPrint by taulman 3D. BluPrint is a “specialty” material and has a Tg of 110C+ but with a print temp of only 265C. BluPrint will allow designers to 3D Print parts that will take high heat for outdoor use such as part replacements for Autos, Boats and Aircraft.

£3.25
Conductive PLA by Proto Pasta

5 or 10 Metres of Conductive PLA Filament (15 ohm-cm). Proto-pasta Conductive PLA can be used to print and complete circuits, as well as used to create a variety of touch sensitive and interactive devices, jewelry and toys. More information inside.

£6.75
Crystal Flex™ from FormFutura

5 & 10 Metre samples of Crystal Flex™ by FormFutura Crystal Flex™ is a revolutionary new German engineered 3D printer filament. Crystal Flex™ is a heavy duty, translucent and yet flexible filament. Crystal Flex™’s transparency is being described as “plexiglass-like” as apparently Crystal Flex™ will let 91% of visible light pass through its fibre.

£3.15
Graphene Enhanced PLA 1.75mm by Haydale

A high strength, easy to print maximum layer bonding Graphene enhanced filament, the perfect compliment to a 3D engineers toolbox!

£5.45
guidel!ne by taulman 3D

High strength FDA Registered - ISO 10993 PETG based material available in 1.75mm & 2.85mm samples.

£2.95
High Density Natural ABS by Gmass

100gms of High Density specialised printer filament by Turner Medtech

£9.80
High Temp PLA Matte Fibre by Proto-Pasta

A bright, bold alternative to Carbon or Glass Fibers, Blue Matte Fiber HTPLA is great for both artistic and technical parts with no special hardware required!

£3.25
HIPS by Reprapper Tech Ltd

A 5 Metre sample of HIPS filament by Reprapper Tech Ltd. HIPS = High Impact Polystyrene, support filament. Let your design imagination go wild, for now you can create elaborate prints with this amazing product. Using a dual extruder you can print alongside ABS and place the whole printed item into Limonene and watch it dissolve, leaving your ABS print unchanged (apart from smelling of citrus fruit for days to come)!

£1.45
iON Nylon Alloy™ by 3DXTech

5,10 or 20 Metre samples of iOn™ Nylon Alloy is an engineering grade material that can be used in demanding applications where PLA and ABS fail due to shortcomings in mechancial, thermal, or chemical performance. Select iOn™ Nylon Alloy when you want to create parts that focus on functionality.

£2.45
LayBrick by Kai Parthy / CC Products

A 5 Metre sample of LayBrick filament by Kai Parthy / CC Products LayBrick is perfect for sculpture modelling and architectural pieces. Looks like a soft and smooth clay in its filament form. Can be printed to have a rough or smooth texture, depending on the temperature it is extruded by. No heated bed necessary. Contains natural mineral fillers (super-fine milled chalk) and harmless co-polyesters.

£2.25
LAYWOO D3 Flex by Kai Parthy

5 & 10 Metre samples of LAYWOO D3 Flex filament by Kai Parthy. Kai Parthy has developed an elastic version of his remarkable wood-like filament called LAYWOO-D3 FLEX, which is flexible. As the same for Laywoo D3, you can achieve different colour tones by changing temperatures.

£3.85
Laywoo D3 wood like filament by Kai Parthy / Lay-Filaments

5 & 10 Metre samples of Laywoo D3 filament by Kai Parthy / Lay-Filaments The revolutionary Laywoo-d3 looks like wood and smells like wood. A polymer mixed with fine wood powder. Because it is also made ​​from recycled wood, printed objects can be sanded to a smooth finish. Even annual rings can be realized, simply set the temperature between ~175 ° C (bright) and ~250 ° C (dark) within your favourite printing/slicing software and you can achieve a tree ring type effect.

£3.65
Magnetic Iron PLA by Proto Pasta

Samples of Magnetic Iron PLA Filament. by Proto-pasta. A perfectly blended combination of 4043D PLA from Natureworks and finely powdered iron. Now what can you print with this? More exciting information inside!

£6.95
MetalFil™ Classic Copper By FormFutura

MetalFil™ - Classic Copper is an incredible new metal-filled PLA-based filament with approximately 80% of gravimetric copper filling. This incredible high filling with copper powders enables every FDM 3D printer user to 3D print copper objects which are almost indistinguishable from genuine copper.

£6.80
MOLDLAY by Kai Parthy CC Products

5, 10 or 20 Metre samples of MOLDLAY by Kai Parthy CC Products. Wax like filament for investment casting or permanent mold casting!

£4.95
Natural Woods by Filaprint

WOOD is a modified PLA based type of filament, that smells and feels like wood. The different wood-types enable us to manufacture this wide range of natural wood colours. The filament is tough and prints very easy. We recommend a nozzle size 0,5mm or larger. It is one of the best performing wood filaments on the market.

£4.95
PC-MAX™ BY POLYMAKER

Polymaker PC-Max™ is an advanced polycarbonate based filament designed specifically for desktop FDM/FFF 3D printing. In addition to high printing quality, great mechanical strength and heat resistance.

£2.45
PC-PLUS CLEAR 1.75MM BY POLYMAKER WITH BUILDTAK™

10 Metre sample of Polymaker PC-Plus™, a polycarbonate based filament designed specifically for desktop FDM/FFF 3D printing. It offers superior printing quality, excellent mechanical strength and heat resistance, with moderate printing temperatures and great warping resistance. It is required to use BuildTak as the printing surface for Polymaker PC-Plus™, a sample of which is included with this product.

£8.85
PC-PLUS™ Transparent 1.75MM BY POLYMAKER

10 Metre sample of Polymaker PC-Plus™ a polycarbonate based filament designed specifically for desktop FDM/FFF 3D printing. It offers superior printing quality, excellent mechanical strength and heat resistance, with moderate printing temperatures and great warping resistance. It is required to use BuildTak as the printing surface for Polymaker PC-Plus™, a sample of which is included with this product.

£4.25
PolyFlex™ by Polymaker

A 5 or 10 Metre sample of PolyFlex™ filament by Polymaker. An amazing material, with both flexible and elastic properties. There has got to be so many different uses for this filament.

£2.80
PolyPlus™ by Polymaker

A 10 Metre sample of PolyPlus™ filament by Polymaker. Described as the most stable PLA on the market. Manufactured by an international team of designers. All ingredients are FDA approved. The resin is sourced from the reliable and world renowned manufacturer Natureworks. Superb stability, resulting in very high quality printed objects.

£3.95
PolyWood™ by Polymaker

A 10 Metre sample of PolyWood™ filament by Polymaker. A wood like filament without containing any wood! A brand new filament foam material. Prints like PLA. Has the colour and texture of wood. Superb quality finish.

£2.50
POROLAY GEL-LAY by Kai Parthy / Lay-Filaments

5 & 10 Metre samples of POROLAY GEL-LAY by Kai Parthy / Lay-Filaments POROLAY GEL-LAY is a new filament which has a jelly-like feature. This material is made from a rubber-elastomeric polymer and a PVA-component. That means that part of this filament is water soluble. Once you rinse this material in water, the PVA component dissolves and the rubber polymer remains as your micro-porous object. The jelly feature of this material makes it ideal for printing artificial limbs or body parts for e.g. robotics, marine animals, floatables and all other squishy objects. GEL-LAY is also very suitable for use in bio-mechanics and objects in water.

£3.80
POROLAY LAY-FELT by Kai Parthy / Lay-Filaments

5 & 10 Metre samples of POROLAY LAY-FELT by Kai Parthy / Lay-Filaments POROLAY LAY-FELT is a new filament which has felt-like features, it contains stiff or soft felt-fibers. This material is made from a elastomeric polymer and a PVA-component.

£4.50
POROLAY LAY-FOMM 40 by Kai Parthy / Lay-Filaments

5 & 10 Metre samples of POROLAY LAY-FOMM 40 by Kai Parthy / Lay-Filaments POROLAY LAY-FOMM 40 is best characterized as foamy and highly porous. This material is made from a rubber-elastomeric polymer and a PVA-component. That means that part of this filament is water soluble.

£3.85
POROLAY LAY-FOMM 60 by Kai Parthy / Lay-Filaments

5 & 10 Metre samples of POROLAY LAY-FOMM 60 by Kai Parthy / Lay-Filaments POROLAY LAY-FOMM 60 is best characterized as foamy and highly porous. This material is made from a rubber-elastomeric polymer and a PVA-component. That means that part of this filament is water soluble. It is slightly firmer than LAY-FOMM 40.

£4.25
Premium Metal PLA  BRASS by Filaprint

Looking for a Metal PLA that doesn't cost the earth! Checkout out our easy to print FilaPrint Metals.

£6.80
Premium Metal PLA  BRONZE by Filaprint

Looking for a Metal PLA that doesn't cost the earth! Checkout out our easy to print FilaPrint Metals.

£6.80
Premium Metal PLA  COPPER by Filaprint

Looking for a Metal PLA that doesn't cost the earth! Checkout out our easy to print FilaPrint Metals.

£6.80
REFLECT-o-LAY by Kai Parthy / Lay-Filaments 1.75mm

5 & 10 Metre samples of 1.75mm REFLECT-o-LAY. The very first truly reflective 3D Desktop printing filament. This surely gets those brain cells buzzing!

£6.20
REFLECT-o-LAY by Kai Parthy / Lay-Filaments 2.85mm

4.5 metre samples of 2.85mm REFLECT-o-LAY. The very first truly reflective 3D Desktop printing filament. This surely gets those brain cells buzzing!

£6.20
Stainless Steel PLA by Proto-pasta

5 metres of Stainless Steel PLA Filament. A perfectly blended combination of 4043D PLA from Natureworks and finely powdered stainless steel. More exciting information inside!

£7.95
T-lyne by taulman 3D

5 & 10 Metre samples of T-lyne by taulman 3D. T-lyne is a unique, crystal clear polyethylene copolymer developed specifically for high durability, flexibility, unique viscosity and a wide temperature range. THE potential candidate for Prosthetics. When placed in hot water you can reshape and it will hold its new shape when cooled!

£2.95
Tech G by taulman 3D

A 5 or 10 Metre sample of Tech G by taulman 3D. An extremely tough PETG polymer with full FDA approved raw polymer documentation and certification.

£3.50
XT-CF20  1.75mm by ColorFabb

5, 10 & 20 Metre samples of 1.75mm XT-CF20 by ColorFabb colorFabb XT-CF20 is a copolyester based carbon fiber composite material that is based on the unique Amphora 3D polymer from Eastman Chemical and is loaded with no less than 20% specially sourced carbon fibers suitable for 3D Printing. Toughness without being brittle.

£4.75
XT-CF20 2.85mm by ColorFabb

5 & 10 Metre samples of 2.85mm XT-CF20 by ColorFabb, manufactured Feb 17th 2015. colorFabb XT-CF20 is a copolyester based carbon fiber composite material that is based on the unique Amphora 3D polymer from Eastman Chemical and is loaded with no less than 20% specially sourced carbon fibers suitable for 3D Printing. Toughness without being brittle.

£4.95