guidel!ne by taulman 3D
High strength FDA Registered - ISO 10993 PETG based material available in 1.75mm & 2.85mm samples.
For material evaluation only. These samples are taken from whole spools, which include a serial number, due to its approved use within the medical sector.
2.85mm samples - spool number 61815260
1.75mm samples - spool number 61815256
Information provided to the user will be in sync with the FDA’s “Technical Considerations for Additive Manufactured Devices Draft Guidance for Industry and Food and Drug Administration Staff”. Section “C” “Material Controls”. While COA’s will be the responsibility of the end user, taulman3D will provide information to support such efforts.
guidel!ne meets the following:
ISO 11607-1: 2006
USP Class VI
DMF (Drug Master File) number 16525
Print temperature = 245C to 252C
When 3D Printed, guidel!ne has a tensile strength of 6,850PSI.
Elongation is 5.9 and a modulus of 281,469PSI.
Heat distortion temp is 70C.
Softening temperature is 100C
guidel!ne is a clear PETG based polymer that prints at 250C. guidel!ne is very easy to print needing only a small amount of retraction. A key feature of guidel!ne is that one can easily print small hollow tubes without the issue of heat build-up deforming the tube.
guidel!ne’s use as a Support Material:
Another feature of guidel!ne is that it’s higher print temperature allow it to be used as a support material for medical grade Nylon. guidel!ne used as a zero-gap support material works extremely well on Nylon with just enough adhesion to form mechanical support yet easy to remove from parts where mechanical removal is accessible.
Middle East -
United Kingdom -
USA - taulman 3d
Note: All filament weights include packaging. Average weight for 5 metres of 1.75mm filament (without packaging) is 15 gms and 5 metres of 3mm filament is 35 gms.
Samples are shipped in a clear resealable bag, with a small sachet of silica gel.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours email@example.com
Are you a filament reseller? You can be one of just five resellers from each region or country, displayed on this product listing. Contact firstname.lastname@example.org for more information.
Write an online review and share your thoughts with other shoppers!
A 5 Metre sample of Nylon 645 by Taulman 3D. This Nylon Polymer creates beautifully smooth and very strong, industrial type prints. Can be used on the majority, if not all 3D FFM Desktop printers. Does not emit fumes, almost no de-lamination is very easy to print.£3.50View Item
5 & 10 Metre samples of Nylon 680 by taulman 3D. An FDA Nylon Resin Co-Polymer, Ethylene Oxide and Flash Steam compatible. It is a pure polymer that is FDA approved (USA). Now in its testing phase of development. Slightly stiffer and clearer in colour than Nylon 645. More information to follow.£4.35View Item