Glow in The Dark PLA by Reprapper Tech Co Ltd
5 & 10 Metre samples of Reprapper PLA Glow in the Dark Filament. Glow in the Dark filament, does exactly that, place it in the dark and watch it glow!
For detailed information on this material go to Reprapper Tech Ltd
You can purchase whole spools/reels/coils from these suppliers.
Middle East -
United Kingdom - 3D FilaPrint
Note: All filament weights include packaging. Average weight for 5 metres of 1.75mm filament (without packaging) is 15 gms and 5 metres of 3mm filament is 35 gms.
Samples are shipped in a clear resealable bag, with a small sachet of silica gel.
Manufacturer recommended printer temperatures.
Extrusion Temp: ABS = 230ºC - PLA = 215ºC
Platform Temp: ABS = 110ºC - PLA = 50ºC
Platform Materials: ABS= Kapton Tape - PLA = Blue Painters Tape
Please note, the above temperatures are only a guide.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours firstname.lastname@example.org
Are you a filament reseller? You can be one of just three resellers from each region or country, displayed on this product listing. Contact email@example.com for more information.
|Brand||Reprapper Tech Ltd|
Based on 1 review
Write an online review and share your thoughts with other shoppers!
I printed the Maker Faire Robot on my reprap fisher. Very little ooze at 215 degrees, less than ooze than I have seen with my regular PLA. Layers held together very well , and the overhangs on the arms were good. All in all a great filament to print with.
A 5 Metre sample of glowFill by colorFabb This high quality PLA will shine like a glow-worm at night, especially if you leave it out in daylight. This PLA/PHA and phosphorescent pigment combination, creates a filament that is tougher and less brittle than standard PLA and glows like a moonbeam.£2.95View Item
5 & 10 Metre samples of ABS Thermochanging Filament. At a low temperature the filament is one colour and as the temperature increases the filament turns a different colour. When the filament temperature cools it goes back to its original tone. However, just holding it in your warm hand can change the colour again. Here we have; Blue Green to Yellow Green - Grey to White - Purple to Pink available in 1.75mm & 3mm.£1.45View Item
5 & 10 Metre samples of ABS Ultra Violet Reactive Filament. This filament changes colour almost instantly when exposed to UV light, especially when in direct sunlight. The colour changes back to white within just a few seconds.£2.95View Item