Glow in the Dark Green Premium PLA by FilaPrint

£2.89
Stock Status: In Stock
Information

Luminous Glow in the Dark Green Premium PLA!  Low warp, easy to print.

This 10 Metre sample is delivered to you in a clear, re-sealable bag with a sachet of silica gel.

Fantastic layer bonding, low temperature printing, (see 3D Benchy print sample in photo) no heated platform neccessary, lays down beautifully on a bed of 
3M Blue Tape or BuildTak™.

Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.

Features:

  • Tougher and less brittle compared to regular PLA
  • Easy to print at low temperature
  • Little "warping"
  • biodegradable
  • Limited odor
Diameter Tolerance Roundness
1.75mm ± 0,05mm >95%
Characteristics Test Method Typical Value
Specific Gravity ASTM D1505 1,24 g/cc
MFI 6,0 g/10 min
Tensile Strength ASTM D882 110 MPa (MD)
145 MPa (TD)
Elongation at break ASTM D882 160 MPa (MD)
100 MPa (TD)
Tensile Modulus ASTM D882 3310 MPa (MD)
3860 MPa (TD)
Impact Strength 7,5 KJ/m²
Printing Characteristics Test Method Typical Value
Printing temperature 180-210ºc
Melting temperature 210±10ºc
Melting point ASTM D3418 145-160ºc
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product