This is a wonderful satin finished filament. A mix of 75% Virgin Quality PLA and 25% Virgin "secret sauce" to give you a filament that is strong, easy to print and which leaves you with a stunning finish.
Get your print settings right on this filament and you will definitely feel the "WoW" factor. "You can't even see the layer lines", is a common phrase which you will hear once you show off your 3D prints made with the 3D FilaPrint Satin PLA filament. Available in a range of vibrant colours.
This 1kg of filament spool is shrink wrapped, boxed and shrink wrapped yet again! Ensuring that it arrives with you moisture free and ready to print. Just to let you know that we keep the packaging style minimalistic, in order to keep our costs down, which helps us to give you the most affordable quality filaments available today. You don't print with the packaging do you?
No heated platform is necessary with the 3D FilaPrint Satin PLA as it lays down beautifully on the majority of FFF/FDM 3D printer platform surfaces without any assistance.Superb tolerances with a wonderful finish, a perfect compliment to your 3D printer.
- Tougher and less brittle compared to regular PLA
- Easy to print at temps around 205c-225c
- No warping
- Pleasant but little odour
- High light refraction
- Smooth and Silky finish
|Characteristics||Test Method||Typical Value|
|Specific Gravity||ISO 1183||1,38 g/cc|
|MFR 210°C/2,16 kg||ISO 1133||14 gr/10 min|
|Tensile strength at yield (MPa)||ISO 527||46,6 Mpa|
|Strain at yield||ISO 527||2,1%|
|E-modulus||ISO 527||3973 Mpa|
|Impact Strength||7,5 KJ/m²|
|Printing Characteristics||Test Method||Typical Value|
Looking for a new type of 3D printing surface that requires very little maintenance and will last for months, if not years!, then try the amazing PrintBite.