EasyWood™ Coconut by FormFutura
Imagine that you can 3D print objects with tropical hardwood…. Well now you can! EasyWood™ 3D Printer Filament Coconut is a revolutionary 3D printer filament. EasyWood™ looks, feels and smells like real wood. EasyWood™ - Coconut is a unique mixture of 40% grinded coconut particles in combination with the modified and proven easy-to-print binding polymers used for the FormFutura EasyFil™ filaments. This extraordinary blend has resulted in a high-end and unsurpassed “easy to print” tropical hardwood filament. You will love the rough surface - with clearly noticeable coconut particles - of our spool-wrapped EasyWood™ - Coconut filament.
Being filled with a significant amount of grinded coconut particles gives EasyWood™ - Coconut some major advantages above other wood-filled filaments. First of all, coconut wood is a tropical hardwood which is a perfect substitute for traditional tropical hardwood and with that it does not affect the world’s rainforests. The wood from the actual coconut is very resistant to (salt) water, and because of its extremely low water absorption the wood from the coconut is hardly influenced by weather- and other nature conditions. This unique characteristic makes our EasyWood™ - Coconut filament significantly less sensitive to moisture than other wood-filled filaments.
EasyWood™ - Coconut has a beautiful dark tropical brown colour and has similar thermal properties to our EasyFil™ PLA. Because of its low shrinkage factor, EasyWood™ is nearly warp-free and therefore EasyWood™will not deform after cooling. Due to its low tendency to warp EasyWood™ can be printed without a heated print bed. If your printer is however equipped with a heated print bed we recommend to set your heat bed temperature to ± 35° to 60°C.
Next to its “easy to use” features, our Formfutura EasyWood™ filament range has an excellent roundness and very tight diameter tolerances, which makes this filament a perfect match with all common desktop 3D printers. Printing with EasyWood™ 3D printer filament will go very smoothly with basically all FFF/FDM technology based desktop 3D printers, such as:
- RepRap (Mendel, Huxley, Prusa)
- MakerBot (Replicator, Replicator 2, Replicator 2X)
- UP! Plus, Up! Mini
- AND MANY MORE....!
EasyWood™ does not contain any hazardous, or chemical substances. EasyWood™ filaments are RoHS certified and REACH compliant.
General Tips & Tricks for printing with EasyWood™ filaments
The printing temperature guideline for printing with our EasyWood™ filament is approximately 210-220°C. As each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to get the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
A good first layer adhesion is of the utmost importance in obtaining the best results for your prints. Firstly make sure that you print bed is accurately levelled and clean. EasyWood™ sticks really well to an unprepared print bed. If you would however like to improve your first layer adhesion, then we recommend to prepare your print bed with Blue Masking Tape. EasyWood™ sticks extremely well to this masking tape. Preparing your print bed with Blue Masking Tape will not only get your EasyWood™ print to stick like a charm to your print bed, it will also allow you to remove your printed object easily from your print bed.
You can purchase whole spools/reels/coils from these suppliers.
Asia - www.3dprms.com
Europe - FormFutura
Middle East -
United Kingdom - 3DFilaPrint
Note: All filament weights include packaging. Average weight for 5 metres of 1.75mm filament (without packaging) is 15 gms and 5 metres of 2.85mm filament is 35 gms.
Samples are shipped in a clear resealable bag, with a small sachet of silica gel.
Manufacturer recommended printer temperatures.
Extrusion Temp: 210ºC - 220ºC
Platform Temp: Heated bed not required - However can print on a bed of 60ºC
Platform Materials: Recommended Eurocol Blue Masking Tape
Please note, the above temperatures are only a guide.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours email@example.com
Are you a filament Reseller? You can be one of just three Resellers from each region or country, displayed on this product listing. Contact firstname.lastname@example.org for more information.
5 & 10 Metre samples of Laywoo D3 filament by Kai Parthy / Lay-Filaments The revolutionary Laywoo-d3 looks like wood and smells like wood. A polymer mixed with fine wood powder. Because it is also made from recycled wood, printed objects can be sanded to a smooth finish. Even annual rings can be realized, simply set the temperature between ~175 ° C (bright) and ~250 ° C (dark) within your favourite printing/slicing software and you can achieve a tree ring type effect.£3.65View Item
5 & 10 Metre samples of EasyWood™ Ebony by FormFutura EasyWood™ is a revolutionary 3D printer filament, it looks, feels and smells like real wood! EasyWood™ filaments contain a unique mixture of at least 40% grinded wood particles in combination with the modified and proven easy-to-print binding polymers used for our EasyFil™ filaments. This extraordinary blend has resulted in several high-end and unsurpassed “easy to print” wood filaments.£3.25View Item
A 10 Metre sample of PolyWood™ filament by Polymaker. A wood like filament without containing any wood! A brand new filament foam material. Prints like PLA. Has the colour and texture of wood. Superb quality finish.£2.50View Item