BluPrint by taulman 3D
5 & 10 Metre samples of BluPrint by taulman 3D. BluPrint is a “specialty” material and has a Tg of 110C+ but with a print temp of only 265C. BluPrint will allow designers to 3D Print parts that will take high heat for outdoor use such as part replacements for Autos, Boats and Aircraft.
BluPrint is a “specialty” material and has a Tg of 110C+ but with a print temp of only 265C. Prints on warm (45C) BuildTak and on clean glass heated to ~92C. Also prints on heated PIE sheets set to 55C.
BluPrint is a semi-clear material of ~ 84% transmission. Like all taulman3D materials, BluPrint is a 100% bonding layer to layer polymer when printed at defined temperatures.
A significant advantage of BluPrint is that when paired with the new E3D Volcano hotend, users and industry can print at speeds of 44mm/s with a 1mm nozzle and .46mm layer. As layer and nozzle size go down, speeds increase as expected to 120mm/s with a .4mm nozzle. BluPrint will allow designers to 3D Print parts that will take high heat for outdoor use such as part replacements for Autos, Boats and Aircraft.
You can purchase whole spools/reels/coils from these suppliers.
Middle East -
United Kingdom -
USA - Early Testing taulman 3d
Note: All filament weights include packaging. Average weight for 5 metres of 1.75mm filament (without packaging) is 15 gms and 5 metres of 3mm filament is 35 gms.
Samples are shipped in a clear resealable bag, with a small sachet of silica gel.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours email@example.com
Are you a filament reseller? You can be one of just five resellers from each region or country, displayed on this product listing. Contact firstname.lastname@example.org for more information.
Write an online review and share your thoughts with other shoppers!