Alloy 910 is a measurable advancement in 3D Printing materials technology from taulman3D. taulman Alloy 910 is the combined effort of chemical companies, extrusion manufactures and taulman3D to specifically develop a single material to meet as many high performance 3D Printing needs as possible. With a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals our t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.
Tensile Strength = 8,100PSI
Modulus PSI = 72,932
Max Elongation at break = 31%
Print Temperature = 245C - 250C
Nozzle size = Any - There are no particulates or additives in Alloy 910
Tg = 82C
Print Bed =
Cold = BuildTak with coat of PVA
Hot = Glass heated to 45C with coat of PVA
(PVA is 50% water and 50% "Elmers Glue All")
Shrinkage = 0.0033 in/in
Transmission = 75%
Color = Clear w/Subtle Amber - May be dyed with acid based dyes.
Availability = 1.75mm and 2.85mm Material is on-hand and shipping worldwide now.
You can purchase whole spools/reels/coils from these suppliers.
Middle East -
United Kingdom -
USA - Early Testing taulman 3d
Note: All filament weights include packaging. Average weight for 5 metres of 1.75mm filament (without packaging) is 15 gms and 5 metres of 3mm filament is 35 gms.
Samples are shipped in a clear resealable bag, with a small sachet of silica gel.
Are you a filament manufacturer? Would you like us to advertise and promote your filament here on GlobalFSD? Then drop us a line and contact name and we will get back to you within 24 hours email@example.com
Are you a filament reseller? You can be one of just five resellers from each region or country, displayed on this product listing. Contact firstname.lastname@example.org for more information.
Not sure what i expected from this stuff.
What i didn't expect was for it to print like really awful nylon.
Found it impossible to get any kind of detailed print, stringy horrible prints that looked like someone had attacked them with dandelion seeds.
Not sure what it's doing in the pet section. Pet generally prints sharp and clean with almost no stringing.
I found this filament to be completely unusable.